Top Ring Bubble Level
Replaces the top ring of our 30mm and 34mm Unimount™, Direct Mount™, Magmount™ and Ultralite™ rings and our 30mm steel rings. Available with integral Angle Degree Indicator mount or as top ring/bubble level only.
The Bubble Level with integral ADI mount (A129) can be turned either way for left- or right-handed actions. The ADI itself must be ordered separately for left-handed (A119) or right-handed (A122) actions to ensure accurate readouts.
| Part # | Description | Screws |
|---|---|---|
| A270 | XTRM - Top Half of Ring w/ Level - 34mm | 4 Screw |
| A271 | XTRM - Top Half of Ring w/ Level & ADI Mount - 34mm | 4 Screw |
| A272 | XTRM - Top Half of Ring w/ Level - 34mm | 6 Screw |
| A273 | XTRM - Top Half of Ring w/ Level & ADI Mount - 34mm | 6 Screw |
| A128 | XTRM - Top Half of Ring w/ Level - 30mm | 4 Screw |
| A129 | XTRM - Top Half of Ring w/ Level & ADI Mount - 30mm | 4 Screw |
| A359 | XTRM - Top Half of Ring w/ Level - 30mm | 6 Screw |
| A360 | XTRM - Top Half of Ring w/ Level & ADI Mount - 30mm | 6 Screw |
Nightforce Angle Degree Indicator
The Nightforce Angle Degree Indicator takes the guesswork out of uphill and downhill shots. Calibrated in degrees, it gives you an instant readout. It is available in two versions: (1) a two-piece, low-profile Mil-Std. 1913 mount for one-piece bases that allows easy installation without removing the scope (shown below); and (2) as part of our 30mm top ring bubble level system (above). It is simple, robust, and requires no batteries. Available in right-hand or left-hand rifle action configurations.
|
Part # |
Description |
|
A119 |
XTRM - Angle Degree Indicator - LH (For left-hand actions) |
|
A122 |
XTRM - Angle Degree Indicator - RH (For right-hand actions) |
|
A120 |
XTRM - Angle Degree Indicator w/Mount - LH (For left-hand actions) |
|
A121 |
XTRM - Angle Degree Indicator w/Mount - RH (For right-hand actions) |
|
A163 |
XTRM - 1913 Mil-Spec Mount for Angle Degree Indicator |
Rail Accessory Platform - Improved (RAP-i)™
The Nightforce Rail Accessory Platform – Improved (RAP-i) is designed for mounting Laser Range Finders (LRFs) above the front ring of the riflescope. The skeletonized, truss-like design allows for superior rigidity and point of impact retention of LRFs. The RAP-i includes the MultiMount™ ring cap that allows the RAP-i to be mounted on the Nightforce UltraMount™, Unimount™, 4-screw Xtreme Duty™ rings, and 6-screw Xtreme Duty™ rings. The RAP-i is available in 30mm and 34mm diameter and Dark Earth or Black anodized finishes.
Weight:
RAP-i with MultiMount cap: 3.9oz
MultiMount™
The Nightforce MultiMount™ was originally designed as a platform for close-range sights to be mounted in conjunction with a primary riflescope. In practice, the MultiMount offers a user-configurable system that is rock-solid for nearly any accessory that will fit. Designed to fit 4- and 6-screw X-Treme Duty™ rings. Two Mil. Std. 1913 rails included.
| Part # | Description |
|---|---|
| A426 | XTRM - MultiMount 34mm - 6 Screw W/ Cradle |
| A425 | XTRM - MultiMount 30mm - 6 Screw W/ Cradle |