Browning X-Bolt Pro Long Range 30 Nosler 26" Barrel Burnt Bronze Cerakote 035443295
Take your game to the next level. Browning delved into semi-custom rifle production with the X-Bolt Pro in 2017. This year we are introducing the Long Range version of the X-Bolt Pro, featuring a heavier profile barrel for increased accuracy at longer distances. What classifies the X-Bolt Pro as a "semi-custom rifle" is the level of specialized finishing touches and higher end construction above the already top-tier X-Bolt family of hunting rifles. First, the X-Bolt Pro features a true carbon fiber stock, making it extremely lightweight and rigid. The stock is filled with a noise-dampening foam.
Cerakote durability. Additionally, the Cerakote finish on the action and barrel is also on the exterior of the stock for added protection. The burnt bronze hue mutes the color of the stock for better concealability. The barrel features a new proprietary lapping process to provide consistent accuracy and easier bore cleaning - avoiding the need for a time-consuming break-in process. Other features include a spiral fluted bolt, enlarged bolt handle, and a threaded muzzle with a muzzle brake or thread protector cap.
RECEIVER – Stainless steel • Cerakote Burnt Bronze finish • Glass bedded • Drilled and tapped for X-Lock scope mounts
BARREL – Stainless steel • Pro Long Range: Heavy sporter contour • Threaded muzzle brake (thread protector included) • Proprietary lapping process enhances the bore finish • Cerakote Burnt Bronze finish • Fluted • Free-floating • Hand chambered • Target crown
ACTION – Bolt-action • 60° bolt lift • Adjustable Feather Trigger • Detachable rotary magazine • Top-tang safety • Bolt unlock button
STOCK – Second generation carbon fiber • Cerakote Burnt Bronze finish • Textured gripping surfaces • Palm swell
FEATURES – Spiral fluted bolt body • Ergonomic spiral fluted bolt handle • Sling swivel studs • Inflex recoil pad (Scope and mounts not included)
BARREL ACURACY
The X-Bolt is free-floated by bedding the front and rear of the action for stability and to help maintain barrel to stock spacing for consistent accuracy. A recessed muzzle crown helps protect the rifling from damage.
FEATHER TRIGGER
For precise shooting in the field or off the bench, there’s absolutely no substitute for a good, predictable trigger. The X-Bolt’s new three-lever Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. The trigger is screw adjustable from 3 to 5 lbs. and factory pre-set at approximately 3 1/2 lbs. An alloy trigger housing contains the hard chromed steel components that are highly polished on all critical contact surfaces. Precise engagement angles mean the X-Bolt Feather Trigger feels light and right and stays that way through many thousands of rounds. Unlike competitors’ triggers with secondary fingerpiece levers, the Feather Trigger is designed right, from the very start.
X-LOCK
Securely mounted optics are essential to the accuracy and precision of any rifle. To ensure the new X-Bolt rifle has the most stable mount possible, it features the X-Lock scope mounting system. The X-Lock system uses four screws per base, replacing the traditional two-screw system. The benefits are obvious, with the scope bases being secured at all four corners rather than only held at the center of the base. This allows for more accurate placement of the bases on the receiver. This revolutionary X-Lock system holds the base tighter to the rifle than ever before.
INFLEX TECHNOLOGY
This recoil pad has proprietary construction and material to promote a directional deflection of recoil forces, pulling the stock comb away from your face to reduce felt recoil and muzzle climb.
BOLT UNLOCK BUTTON
The bolt unlock button is a feature found on the Browning X-Bolt and the AB3 bolt action rifles.
It works in conjunction with the top-tang safety to provide an added measure of safety during checking and unloading of the chamber. Conveniently located on top of the bolt lever, the bolt unlock button allows the bolt to be unlocked and opened with the safety in the on safe position. The safety blocks the trigger sear and features a firing pin block for added safety.
This feature is likely one of the most understated and under appreciated of Browning features until you actually use it. Then it becomes an integral part of the use and operation of your rifle.
60° BOLT LIFT
A 60º bolt is something you want. Browning X-Bolt, A-Bolt and AB3 rifles have a short 60° bolt lift. Many competitors' rifles incorporate a 90° bolt lift that is not only slower and cumbersome but places the bolt near or on the rifle's scope, making the bolt more difficult to operate. The 60° bolt lift has been a hallmark of Browning bolt action rifles for over three decades.
The comfort and convenience of the added clearance between an open bolt and a large scope cannot be overstated. You will appreciate it. This photo below details the X-Bolt.
ROTARY MAGAZINE
Several Browning firearms feature a rotary style magazine. They are distinguished by the fact that the cartridges make a circular path as the move from the "bottom" of the magazine to the top position. The Browning X-Bolt and the Browning T-Bolt are current models featuring rotary magazines. The advantage of a rotary magazine, versus one which offsets every other round to the right and left it that the cartridge is always presented perfectly in the middle. There is no left/right bias similar to a single stack magazine.
X-Bolt Magazines. They are constructed from a durable lightweight polymer, the magazine is designed to feed cartridges directly in-line with the bolt, instead of offset as with traditional leaf-spring magazines, for a straight shot right into the chamber. An ergonomic magazine-mounted release lets the magazine rotate directly downward and into your hand. The magazine sits flush with the bottom of the rifle for a sleeker appearance. Additional magazines can be kept loaded and carried in your pocket or pack for easy access.
SPECIFICATIONS:
| Item Number: 035443295 | UPC: 023614739258 |
| Action Length: Long Action | Caliber: 30 Nosler |
| Barrel Length 26" | Overall Length: 46 3/4" |
| Length of Pull: 13 5/8" | Drop at Comb: 11/16" |
| Drop at Heel: 1/2" | Weight: 7 lbs 8 oz |
| Magazine Capacity: 3 | Twist Rate: 8" |
| Barrel Finish: Burnt Bronze Cerakote | Stock Finish: Burnt Bronze Cerakote |
| Receiver Finish: Burnt Bronze Cerakote | Chamber Finish Polished |
| Barrel Material: Stainless | Barrel Contour: Heavy Sporter |
| Stock Material: Carbon Fiber | Recoil Pad: Inflex 1, Small |
| Pistol Grip Cap: None | Checkering: Textured Grip Panels |
| Sling Swivel Studs: Cerakote | Receiver Material: Stainless |
| Trigger Finish: Gold Plated | Bolt Slide Finish: Burnt Bronze Cerakote |
| Magazine Type: Detachable | Trigger Material: Alloy |
| Trigger Guard Material: Alloy | Trigger Guard Engraving: Buck Mark in Black |
| Floor Plate Material: Composite | Drilled and Tapped for Scope: Yes |
| MSRP: $2,429.99 |
**PLEASE HAVE YOUR FFL EMAIL A COPY OF THEIR CERTIFICATE TO: info@tds-us.com [INCLUDE YOUR NAME AND ORDER NUMBER IN THE EMAIL]**
