UNKNOWN SUPPRESSORS OG SIX-FIVE 6.5MM 3D Printed Grade 23 Titanium Length 8" Ultra Light 7.4 Ounces 1.55" Girth 5/8-24 Direct Thread Black USOG65BLK
The OG makes rifles quiet and sound better. For most suppressors, bore size does not have a noticeable effect on suppression levels when a smaller caliber bullet is shot through it. But we have found that our 6.5 mm OG performed better than the .30 Caliber version on 6.5 mm and smaller cartridges. Turns out that for reflex suppressors, matching the bore size to the caliber does have quite the effect on sound suppression!
Designed to bring the sound suppression and over-the-barrel tech to 6.5 mm cartridges, the OG 65 does so in a lighter fashion.
Measures 129.5 dBA at the shooter’s ear, shot out of a 24-inch 6.5 Creedmoor firing Hornady 140 ELDM ammunition.
Titanium can be subject to strength loss at high heat. We recommend keeping your titanium suppressor below 800 degrees.
There are no barrel restrictions for standard bolt face cartridges. For short action magnum we recommend 16 inches or longer. For long action magnum we recommend 18 inches or longer.
6.5 mm bore
129.5 dBA at the ear
Printed from Grade 23 Titanium
One solid piece of material
Length: 8”
Width: 1.55”
Weight: 7.4 ounces
Hub: 5/8-24 direct threads (1/2-28 adapter available)
Fitment: 4” around the barrel, 4” in front of the muzzle
Up to .750” diameter barrels (tapers to 0.830 inches at bottom)
